SMC offers the benefit of offering a wide range of products that are well suited in Analyzer applications in the In Vitro Diagnostics (IVD) Industry. SMC can be a single source supplier for components like fluid isolation valves, electric actuators, liquid pumps and ionizers.
LVM Chemical Valve
Compact direct operated 2/3 port solenoid valve for chemicals. It has a rocker type construction to minimize the dead volume. Operating pressure ranges from -75 kPa to 0.60 MPa. Available as body ported, direct tube connection or base mounted.
VDW General Fluid Valve
The VDW series is a compact direct operated 2/3 port solenoid valve for air, water and medium vacuum. Available body materials include resin, brass or stainless steel. Resin body is offered with one touch fitting to reduce installation time. It is suitable for applications that requires a small footprint and flow of less than Cv of 0.30.
VX2 General Fluid Valve
The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.
2 Finger Gripper
3 Finger Grippers
LEF Slider Type
Rodless type electric actuator features a load mounting platform situated above a ball screw drive or belt drive. Ball screw type advantages are better positioning repeatability than belt drives. Belt drive provides a more economical offering.
LES Compact Slider
LER Rotary Type
Rotary electric actuators feature a rotating worktable positioned above an enclosure for the motor and drivetrain. Three different motor/table sizes are available, with each size offering a basic and high torque variation. Additionally, each size offers four rotating angle options, including 90°, 180°, 310 / 320°, and continuously rotating.
LAT3 Card Motor
LSP Liquid Pump
LSP series is a compact solenoid diaphragm pump for liquid. It dispenses fixed amount of liquid from 5uL to 200uL each time it is energized. Its diaphragm movement is supported by buffer, extending life of the product and improve its repeatability (+/1%) by restricting deformation of the diaphragm. LSP is used in applications such as medical analyzer, ink jet printing or semiconductor/solar cell production.
PA Process Pump
Series PA is a double acting, compact, large capacity diaphragm pump suitable for transfer and recovery of a wide variety of fluids. The PA series is available in 3 types; automatically operated, air operated or automatically operated with a built-in pulsation attenuator.
PB Compact Process Pump
The PB series is a compact, single acting diaphragm pump which is suitable for transfer and recovery of a wide variety of fluids. The PB series is available with a built-in solenoid valve or in an air operated style. Space is saved due to the centralization of piping and wiring areas on the top and bottom surfaces.
IZF Fan Ionizers
Unlike bar or nozzle types, this fan ionizer does not require a pneumatic air supply. The fan draws in ambient air, then ionizes the air with four electrodes located around the perimeter of the discharge grill. The fan can be wired into a 24VDC machine power supply, or use the optional 120V AC adapter. The small form factor adapts well to enclosure mounting, or select the benchtop mounting bracket for free positioning.
IZS Bar Ionizers
By neutralizing static electricity, our IZS bar style Ionizer prevents damage to work pieces caused by sticking. Static charge removal time can be reduced with an optional sensor that directly senses charge allowing the removal of static electricity at high speed (0.3s) by generating the appropriate ion polarity. Needle cartridges can be replaced quickly to reduce down time. The IZS bar style Ionizer is available in various lengths to meet the specific needs of your work area.
IZN Nozzle Ionizers
SMC offers two industrial static control options for compact or confined target treatment areas. The IZN Nozzle Ionizer is a palm-sized, self-contained static control device with a cable for PLC I/O and power supply connections. The IZT43 pairs a smaller ionizing head with separate power supply and control modules, for even more confined applications up to 3m from the operator's workstation.
Applications Powered by SMC
- Applications Overview
- Air Management System
- Air Saving Products
- Analyzer Components
- Dust, Bulk and Powder Environment
- Chemical Handling
- Collaborative Robot Grippers
- Cleaning & Laundry Industries
- Eco Products
- Energy Saving Products
- Nitrogen (N2) Compatible Products
- Pick and Place
- Robotics Equipment
- Safety Related Products
- Space Saving and Lightweight
- Static Control Equipment
- Temperature Control Equipment
- Temperature Resistant Products
- Universal Robots
- Water Resistant Cylinders
- Weld Process Equipment