Measurement / Metrology

HRS compact recirculating chillers are designed to meet the widest range of single-point applications in both industrial and technology settings. The package design is robust enough for the factory, yet ergonomic and compact for lab installations. Coolant can be either heated or cooled within the set temperature range. Choose from six cooling capacities, air or water cooled refrigerant, and global power supply options. This model is compatible with 100 VAC power.

The HRR is a temperature control device mountable in a 19-inch rack.  Rack mounting recovers desktop or floor space, permitting stacking of related devices and mobility, depending on the rack style.  Recirculating fluid removes heat from the process source, which is then removed from the fluid by an air cooled refrigeration circuit.  Air cooling frees the installation from dependence on facility cooling water.  Coolant temperature stability is ±0.1°C within a set temperature range of 5 to 35°C.  This device is self-contained with coolant and refrigerant circuits, fan cooled heat exchanger, electronic controls, pump, tank and power supply.

Series IDF*E refrigerated air dryers are suitable for use in aftercooled systems with compressors up to ~20 hp (depending on dew point desired).  These durable units have simple control systems and are easily serviced.

The LEPY is a rod type electric actuator with a miniature form factor, small enough to fit in the palm of your hand! The series includes two body sizes with inline mounted motors. Maximum stroke is 75mm, and maximum work load is 2 kg, or 50N pushing force depending on the application.

SMC has improved product performance and reliability with the redesigned SY series valve.  The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved.   Side, top and bottom port/pipe directions are available to allow flexible installation.  The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

SMC has improved product performance and reliability with the redesigned SY series valve.  The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved.   Side, top and bottom port/pipe directions are available to allow flexible installation.  The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

SMC's VP300/500/700 series solenoid valve, offers high flow capacity and reduced power consumption (1.55W standard, 0.55W with power saving circuit).  The VP series may be used as either a selector valve, or a divider valve.  It is available in a normally closed or a normally open style. The series is vacuum applicable up to –101.2kPa.

JSX series is a 2-port direct operated solenoid valve for air, water, steam, vacuum and oil. It has standard stainless-steel enclosure to have superior resistance to both corrosion and water. JSX series utilizes new coil technology to maximize magnetic efficiency and reduced energy consumption. Internal stopper is utilized to reduce metal noise and longer service life.

The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.

The AF-D series of modular air filters brings a modern appearance to SMC's line of filters while maintaining the high performance of our other series.  These 5 μm units can serve as appropriate filtration for many applications or as a pre-filter for fine filtration/coalescing units.  The transparent bowl guard on the size 30 and larger provides improved environmental protection as well as full view of the bowl contents.

The AR-D series of modular air regulators brings a modern appearance to SMC's line of regulators while maintaining the high performance of our other series.  Its 125 psi maximum set pressure and range of standard features make it ideal for most applications.  The new handle design make these units easier to adjust than previous models.  The AR-D is currently available in three body sizes with more to come in the near future.

For applications requiring micro-mist separation up to .01µm with adjustable pressure regulation, the AWD offers these features built into one unit. This combination of products saves space and mounting hardware. Available with ports from 1/8 to 1/2 with NPT, Rc and G (PF) threads as standard. The many options available such as auto-drain, gauge, variety of bowl choices and regulation set pressures make this series easy to configure to your application.

The AM*-D mist separators are designed for modular connectability and to match the aesthetics of the AC-D series of FRL components.  Flow capabilities are improved beyond the legacy AM series for extended applicability.  These coalescing filters are nominally rated at 0.1 micron for an initial stage of oil removal after a particulate filter.

The VHS series provides a convenient means of isolating supplied pressure in a pneumatic system and exhausting downstream pressure for maintenance purposes.  The units can be locked in the exhaust position and can be an integral part of an energy isolation system.  Air flow direction is easily identified by handle orientation and labelling.