International Production and Processing Expo

Series PF3W7-L digital flow sensor constantly monitors water or coolant flow.  "L" models are IO-Link compatible.  These sensors also have the "Z" designation for redesigned piping adapters, imparting a 13-53% weight reduction depending on flow range.  PF3W7-L features an integrated 3-color, 2-screen display.  Options include a manual flow adjustment valve and temperature sensor.  The main screen displays instantaneous flow value in red or green, while the white subscreen can show temperature, the switch set point, accumulated or peak/bottom value, or a line name.  The display rotates in both clockwise and counter-clockwise directions, offering improved readability during operation.  When paired with an IO-Link master, values and settings can be accessed from the HMI screen.  PF3W7-L incorporates IO-Link version 1.1 and COM2 speed.  48 bits of process data include flow and temperature values, switch outputs, and diagnostics.  Both IO-Link data and switch outputs can be read over the M8 or M8-to-M12 cable.  PF3W7-L is IP65 rated, and is both RoHS and CE compliant.

With the CG5-X2977 series, we offer you efficient, long-lasting cylinders for use in wet areas of the food and pharmaceutical industries. A special blue scraper which meets the material requirements of the FDA and EU 1935/2004 prevents water from entering the cylinder.

mGrip is a modular gripping platform that leverages soft polymers to enable adaptive handling of objects of varying size, shape, and weight. This high-speed and easy-to-use solution is perfect for automating pick-and-place applications.

Series KQG2 is a one-touch fitting made of all stainless steel SUS316, except seal parts. The series is suitable for use with steam and is grease-free. Applicable tubing includes FEP, PFA, nylon, soft nylon, polyurethane and polyolefin. The KQG2 series is available in both metric and inch sizes. The KQG2 is more compact and lightweight, and offers more configuration variations and tube sizes than the KQG series.

• All stainless steel (SCS13: Equivalent to stainless steel 304)
• Sealant not required
• Max. operating temperature: 260℃
• Grease-free

• Bacteria capture performance: LRV ≥ 9
• Use of FDA/Food Sanitation Law compliant materials
• Parts in contact with fluid: Resin/Rubber
• Use of NSF-H1 grade lubrication for flow path
• Designed for use in applications to HACCP principles and FSSC22000 standards
• Nominal filtration rating: 0.01 μm (Filtering efficiency 99.99%)
• Initial pressure drop: 0.03 MPa (Inlet pressure 0.7 MPa, at max. flow rate)
• Flow rate: 500 L/min (ANR)

The MGPM-X2532 is a compact guide cylinder with external stainless steel construction. It features improved corrosion resistance in environments exposed to water over the standard and -XC6 variants of the MGPM series.  

The AC-D series of modular F.R.L. brings a modern appearance to SMC's line of air preparation equipment while maintaining the high performance of our other series.  The maximum set pressure of the AC-D is 125 psi allowing use in a broad range of applications.  Most of the features of the AC-A and -B have been incorporated into the AC-D - transparent bowl guards for full visibility; embedded gauges and pressure switches; reduced maintenance space and simplified element change on AF-D series filters.

Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. The units are compact, lightweight, and include an easy to read LED display.  Input signals can be analog current or voltage, 4 or 16 point presets, or a range of communication protocols including CC-Link, DeviceNet™, PROFIBUS, RS-232C or I/O-Link.  EtherNet/IP™, and PROFINET are available as well.  See the separate configurators on this site.  Monitor output is available as an analog or switch signal.  ITV regulators are IP65 equivalent.

Filter – regulator – lubricator combinations with external epoxy coating of metal surfaces for use in aggressive or washdown environments.

AW-X2622 is a 316 stainless steel filter regulator with an enhanced temperature range.  This model is capable of operation in ambient temperatures of -40 to -176°F (-40 to 80°C) and line pressures up to 290 psi (2.0 MPa).

The VHS series pressure relief valve provides a convenient means of isolating supplied pressure in a pneumatic system and exhausting downstream pressure for maintenance purposes.  The units can be locked in the exhaust position and can be an integral part of an energy isolation system.  Air flow direction is easily identified by handle orientation and labelling.  

IDF* series refrigerated air dryers are available in multiple configurations for use around the world.  These standard inlet air temperture models (max. 122~149°F [50~65°C]) reliably generate dew points down to 37°F (2.°C) that is suitable for most industrial applications.  All feature environmentally friendly R134a or R407C refrigerants, compact designs and stainless steel heat exchangers.

The AMG series water separator is installed on the air pressure line to remove water drops from compressed air. It is available in 7 sizes with a variety of optional combinations to meet your application requirements.

JSY series is a 5-port directional control valve targeted for the robotic arms and end of arm tools.  It has compact and lightweight design while improving its flow characteristics.  JSY series is available as plug-in and non plug-in types.  There are 3 valve body sizes available for JSY series, JSY1000 (6.4mm), JSY3000 (10mm) and JSY5000 (15mm).  JSY1000 is the world's smallest width 5 port valve with body width of 6.4mm.  JSY plug-in type is compatible with fieldbus and ethernet communication module such as EX600 and EX260.

SMC has improved product performance and reliability with the redesigned SY series valve.  The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved.   Side, top and bottom port/pipe directions are available to allow flexible installation.  The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

JSY5000-H clean design valve manifold have a crevice free exterior for low fluid accumulation and easy to clean.  With its IP69K enclosure, use of NSF-H1 grease and FDA compliant materials, and SUS316 metal parts, JSY5000-H can be used in applications where high pressure cleaning is required.

SMC's hygienic design cylinders, series HY, offers significantly improved water resistance by adopting a new lubricating construction. The cylinder's flat configuration (grooves for auto switches and holes for cushion needles, etc. have been eliminated) allow the surface to be wiped off easily.

The CG5-S series is a stainless steel cylinder that uses grease for food processing machines that meets FDA standards. The CG5-S series can be disassembled for replacement of seals which extends the service life of the cylinder. All stainless steel specification for external parts. Mounting bracket surfaces have been electropolished, making them smoother to prevent build-up of liquids and foreign matter. Plugs are provided for unused mounting threads to prevent residue build-up in the threads.

Series CJ5-S is a small bore stainless steel cylinder, designed for use in environments with water spray (such as food processing machines). A special scraper (standard) prevents water from entering the cylinder. Non-toxic additives allow confident use in equipment for food, beverage and medical products, etc. The CJ5-S series can be disassembled for replacement of seals.

All stainless steel exterior double acting single rod version of our NCM cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 2 mounting styles (front nose & double end). The double end mount does automatically include a rear clevis hole. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12".

The EX600 serial interface offers a full suite of diagnostics and programmable parameters to meet the most stringent requirements. The EX600 offers excellent flexibility including digital input, digital output and analog input unit options. With the use of D-sub output blocks, a maximum of 9 remote D-sub manifolds can be attached to one EX600 communication module. This serial interface is compatible with series SV1000/2000/3000, VQC1000/2000/4000, S0700 and the new SY series valves. Available protocols include PROFIBUS-DP®, DeviceNet™, CC-Link, Ethernet I/P™ and EtherCAT®, PROFINET, POWELINK and CC-Link IE Field™

The EX600 serial interface offers a full suite of diagnostics and programmable parameters to meet the most stringent requirements. The EX600 offers excellent flexibility including digital input, digital output and analog input unit options. With the use of D-sub output blocks, a maximum of 9 remote D-sub manifolds can be attached to one EX600 communication module. This serial interface is compatible with series SV1000/2000/3000, VQC1000/2000/4000, S0700 and the new SY series valves. Available protocols include  Ethernet/IP™, PROFINET. 

Controllers and drivers needed for our electric actuator family.  You will find step motor, servo motor and card motor controllers as well as 24VDC Fieldbus gateway units and AC servo drivers.

Electric linear actuators can push, pull or transfer workloads in a distinctly different way from pneumatic actuators. Pneumatic actuators rely on relatively crude devices such as rubber cushions or shock absorbers, pressure regulators, and flow restricting fittings at the port to control their motion. By contrast, an electric actuator employs an electronically controlled motor and ballscrew to deliver a precise motion profile through acceleration, speed and deceleration. Further, the controller is capable of integrating multiple ‘stop’ positions along the actuator's stroke with high precision and repeatability.

Series KFG2 fittings can operate with ambient operating fluid temperatures of -65 to 260ºC (swivel elbow type -5 to 150ºC).  With their stainless steel 316 construction and unique non-rubber seal insert connection, these grease-free fittings offer high levels of corrosion resistance, and can be used with numerous piping materials including FEP, PFS, soft and regular nylon, polyurethane and polyoelfin.  Available in male elbow, male connector, male branch tee, straight union, union tee, bulkhead union, union elbow, swivel elbow and female connector options, the KFG2 fittings can accommodate tube sizes from 4mm to 16mm and 1/8" to 1/2" with port sized thread connections from R1/8 to R1/2 and 1/8NPT to 1/2NPT.

Suitable for applications where copper free specifications are required, the “–FG” series can also be used in areas where wash down could degrade standard flow controls, such as food and packaging. This series is designed to offer the maximum control by increasing the number of turns of the needle to 10. The body and adjustment are made of high impact white resin for a clean look. This series also incorporates SMC’s one-touch fitting available for tubing sizes from 4mm to 12mm OD.

S coupler series KK employs a unique connection method. A slim body design and large effective area are achieved with a construction that does not use steel balls or valve springs and therefore does not restrict the flow path. Together with a reduction of the body size, pressing parts and resin parts are used to achieve an overall weight reduction.

The HRS-R is the IP54 rated variation of our popular HRS compact recirculating chiller.  Upgrades include an IP54 electrical box and IP67 cable entries on the back panel.  Additionally, the entire paneled housing is comprised of coated metal to resist degradation from oil mist, with an available stainless steel option for greater corrosion resistance.  An optional 12L circulating coolant return tank can be selected.  This tank has a capped opening separate from the fill port for easier cleaning when necessary.  Finally, the ambient temperature upper limit has been increased to 45°C.  The HRS-R shares many features with the standard HRS, including common overall dimensions, caster wheels for mobility, an angled fill port with a level indicator for the fluid tank, and a heating function.  A magnet pump eliminates leakage and seal replacement.  The dustproof filter is removable for cleaning without tools.  The refrigerant is air cooled.  If an external PF3W flow sensor is desired, a 24VDC power supply is available at the rear.

HRS compact recirculating chillers are designed to meet the widest range of single-point applications in both industrial and technology settings. The package design is robust enough for the factory, yet ergonomic and compact for lab installations. Coolant can be either heated or cooled within the set temperature range. Choose from six cooling capacities, air or water cooled refrigerant, and global power supply options. This model is compatible with 200 VAC power.

Unlike bar or nozzle types, this fan ionizer does not require a pneumatic air supply.  The fan draws in ambient air, then ionizes the air with four electrodes located around the perimeter of the discharge  grill.  The fan can be wired into a 24VDC machine power supply, or use the optional 120V AC adapter.  The small form factor adapts well to enclosure mounting, or select the benchtop mounting bracket for free  positioning.

SMC offers two industrial static control options for compact or confined target treatment areas.  The IZN Nozzle Ionizer is a palm-sized, self-contained static control device with a cable for PLC I/O and power supply connections.  The IZT43 pairs a smaller ionizing head with separate power supply and control modules, for even more confined applications up to 3m from the operator's workstation.

The IZG10 Gun Type Ionizer combines the functions of a triggered, compressed air blow gun and a high frequency AC ionizer.  This device allows a user to easily clean dust-contaminated workpieces, or separate clinging films or sheets of paper or carboard during manual operations.  Once the target materials are cleaned, additional operations can be performed such as assembly, printing or labeling, surface treatment, or packaging.  Ergonomic features such as a low 200g weight, easy to hold grip, and trigger settings improve comfort and reduce user fatigue.  Energy savings result from selecting a pulse blowing mode, an OFF timer, or setting on the flow adjustment valve.  High visibility LEDs indicate power, ion generation, maintenance requirement, or function errors.  A removable nozzle allows emitter cleaning and eventual replacement at its end of life.  An optional 30psi OSHA-compliant bypass nozzle is also available.  Finally, a bright LED at the front illuminates the target area for detailed work.  Includes 3m power supply cable.

Antistatic fitting and tubing is made from a conductive resin is making them ideal for high static environments.

Anti-static suction cups are available in conductive NBR or anti-static urethane. The urethane pad surface resistance 109 to 1011Ω. Anti-static vacuum pad attachment is made from a conductive PEEK material

The IZH10 is SMC's handheld electrostatic meter. This meter features two function buttons and a backlit LCD display. The meter can be used to investigate and verify static electricity charges up to +/- 20,000 V.

The ZK2*A series is an energy-saving generator with 93% reduced air consumption.  It has a 50% increase in suction flow compared to other single stage SMC generators.  The ZK2*A also has various mounting options to choose from.

Vacuum Generator series ZL series is a multi-stage, high-efficiency vacuum generator, which operates at 150% efficiency (compared to about 40% for other units). For each scfm of compressed air it consumes, the ZL generates an incredible 1.587 scfm of suction flow. The ZL is available with a built-in vacuum switch with digital readout for design flexibility. Other features include built-in suction filter, exhaust silencer, and one-touch tube fittings. Its' compact design allows for mounting from three sides.

The ZP3P series suction cups are made of a silicone rubber that is compliant with FDA21CFRSS1772600.  The blue colored pad can be easily distinguished during contamination inspections.  The sealing skirt design reduces leakage and offers a better sealing performance for film.  Also incorporated into the design is a stopper support in the center to help wrinkle prevention on thin work pieces during adsorption.

The ZP3P series is made of a silicone rubber that is compliant with FDA21CFRSS1772600.  The blue colored pad can be easily distinguished during contamination inspections.  The sealing skirt design reduces leakage and offers a better sealing performance for film.  Also incorporated into the design is a stopper support in the center to help wrinkle prevention on thin work pieces during adsorption.

ISE20B-L is a digital pressure sensor supporting the IO-Link communication protocol.  When paired with an IO-Link master, measured values, and settings can be accessed from the HMI screen of a PLC.  ISE20B-L incorporates IO-Link 16-bit process data includes 2 output bits for set points, a diagnosis bit, and 13 bits for the measured pressure valve.   The 3-screen, 3-color display shows the instantaneous reading in red or green, and the setting label and its numerical value in orange.  ISE20B-L is UL/CSA, CE and RoHS compliant, with an IP65 enclosure rating.

ZSE20B(F)-L is a digital vacuum sensor with IO-Link communication protocol support.  When paired with an IO-Link master, measured values, and settings can be accessed from the HMI screen of a PLC.  ZSE20B(F)-L incorporates IO-Link 16-bit process data includes 2 output bits for set points, a diagnosis bit, and 13 bits for the measured pressure value.  The 3-screen, 3-color display shows the instantaneous reading in red or green, and the setting label and its numerical value in orange.  ZSE20B(F)-L is UL/CSA, CE and RoHS compliant, with an IP65 enclosure rating.

This next generation ISE70 pressure sensor provides continuous quantitative values, as well as switched digital outputs when pressure set points are met.  This sensor is also IO-Link compatible.  Sensor information, such as identity, functional state, cable connection, and current or switch values can be set or monitored remotely though an IO-Link master, and connected to a fieldbus network.  The ISE70 is designed for abusive environments that may also include splashed coolant, lubricants or grime.  Electronics are packaged in a metal housing, while the piping connection is a stout lug with female threads, which together protect the sensor against accidental collisions with other objects in the area.  A smooth display face with membrane type buttons avoids contamination from grit and sticky residue that could clog or jam raised rubber buttons.  The display is angled and can rotate 336 degrees, to permit easy reading when indirectly mounted.  The main screen shows instantaneous values in red or green, while the sub screen setting appear in orange.  Switch indicators will also light when set points are reached.

SMC's hygienic auto switches were designed to work in areas where the cylinder surface is washed.  Rail mounting allows a freely adjustable mounting position, including intermediate positions.  These switches are designed with as many curves as possible and no recessed areas leaving extremely small amounts of residual cleaning solvent.  D-F6 auto switches have a stainless steel case and set screw.