Commutateurs électroniques
Switches with electronic vacuum detection that provide a signaloutput when a setpoint is reached.
PS1100 / PS1200, Vacuostat électronique compact avec prise de montage, l'indicateur LED
PS1100 and PS1200 are compact vacuum switches with digital output signals. The switch setting trimmer rotates through a 220° range using a precision screwdriver. A red LED lights up when the output signal is ON. Insert the switch port into a one touch fitting to monitor pressure. PS1100 monitors vacuum and low pressure, while PS1200 monitors vacuum. Switch output is ON when pressure is below the set point. Both switches are compatible with any non-corrosive, non-flammable gas. PS1100 / PS1200 are RoHS and optionally CE compliant, with an IP40 enclosure rating.
- interrupteur à vide compacte avec réglage rotatif manuel d'un signal de sortie numérique
- Régler la plage: -0,1 à 0,4 MPa (PS1100) ou -100 à 0 kPa (PS1200) < li> alimentation alimentation secteur: 12 à 24 VDC
- Répétabilité: ± 1% de FS
- Options de tuyauterie: & oslash; 6 mm ou & oslash; fiche de 1/4" pour raccords
- moulé 3 mètres, le câble 2 fils compatibles avec le câblage NPN et PNP
ZSE1, Compact Pressure Switch, For ZM Vacuum System
The ZSE1 series is a compact, vacuum pressure switch available in a single setting with hysteresis adjustment, a double setting/ double output type or an analog output type with hysteresis adjustment. The ZSE1 is lightweight and the optional plug-in connector makes wiring easy and simple.
ZSE2, Compact Pressure Switch, For ZX/ZR Vacuum System
The ZSE2 series is a compact, pressure switch (for vacuum pressure) and can be integrated with ZX or ZR vacuum systems. The ZSE2 series pressure switch has a quick response time of 10mS and the plug connector option makes wiring easy and simple.
ZSM1, commutateur à vide, Style de membrane
ZSM1 is a basic vacuum switch with 1 output. No analog output is included. Solid state and contact reed switch options are available,with different voltages. The switch output turns ON when vacuum is greater that the set point. A red LED indicator also light to correspond with the output signal. A rotary trimmer adjusts the switch set point. ZSM1 can be mounted in a ZM generator unit, or piped by metric or NPTF male threads. Electrical connection is made by a 2 or 3 wire cable. This switch is compatible with any non-corrosive, non-flammable gas.
- interrupteur à vide de base avec le réglage rotatif d'un signal de sortie de tension de niveau d'alimentation
- gamme de vide: -80 à -27 kPa
- Sortie: commuté tension de niveau d'alimentation
- alimentation alimentation secteur: 4.5 à 28 VDC (état solide) ou 100V AC / DC (roseau)
- Répétabilité: & plusmn; 10% ou moins
- tailles Port: 1/8 RC ou 1/8 mâle NPTF ou ZM genertor montage